You are not logged in. Please login or register.
What level is actually coming out of a VLT? And, is it adjustable/switcahabel via menu somewhere? I couldn't find any mention in the manual but that'd be no surprise - TC thinks the VLT is a looper with side effect, right ;-)
Anybody knows about them levels? thanks, K
I think the level control is on the right side next to the headphone volume??
I see a headphone output pot there and a mic gain input pot....?
Output range according to the spec is 14.5 dBu. The "Level" knob would appear to control both the main output level as well as the headphones. Have you tried tweaking the Level control to see if it changes the output?
Ahh, I haven't tried that ;-) I'll report back. And thanks for the 14.5 dBu number.
... The "Level" knob would appear to control both the main output level as well as the headphones.
Who would have figured? Now that is good to know!
Last edited by jazzmandan (2011-09-14 10:21:06)
Don't forget the advanced menu master output option. Many of us had to locate that early on due to the loud hiss from the XLR on factory settings. I think Joey recommended -20db but I went -10db The 1/4" output isn't as hot / noisy but if you switch back and forth between XLR and 1/4" you will likely need to tweak that adv menu setting often.
I know that's not specifically what the OP referenced but I was asking myself the same question the first time I plugged an XLR line out of the VLT.
Do you use on stage the stereo 1/4" or mono XLR?
Regards - Krzysztof
I set the output from stereo to dual mono and the hiss disappeared.
Powered by PunBB, supported by Informer Technologies, Inc.
Currently installed 2 official extensions. Copyright © 2003–2009 PunBB.